Restore Factory Settings
- Schlage door lock user manual Manuals Schlage door lock user manual. Read/Download: Schlage door lock user manual Plus, our wireless electronic deadbolt door locks allow you to add multiple connected locks Easy installation and wireless deadbolt holds up to 19 user codes. Customer Service phone number. Video: How to Program Keypad Lock.
- 2 Delete All User Codes function will remove ALL user codes, but will not change the programming code. User Codes cannot be recovered after this function is completed. 3 The Turn Lock Feature is available only on the BE369 (deadbolt). When this feature is disabled, a valid user code must be entered in order to lock the lock from the outside.
WARNING: Locate the default programming and User Codes on the front of the Keypad Locks
With an easy-to-install Schlage keypad and touchscreen, electronic door locks, coming and going is keyless, effortless – and painless. Plus, our variety of electronic finish and style options pair effortlessly with our most popular trim styles, allowing you to expertly tie together the perfect style inside and out.
Programming Guide or the back of the keypad before beginning! Default programming and User Codes will
be restored. All existing User Codes and current Programming Code will be erased. Customer Service cannot
retrieve lost default codes! Do not restore factory settings unless you can locate the default codes.
1. Disconnect the battery. For BE365, see page 3. For FE575 and FE595, see page 5.
3. Reconnect the battery and wait until is no longer lit.
4. Within 10 seconds, press and hold until lights green and the lock beeps.
ProblemBeeps*LightsSolution
simply pushing the Schlage
1 High
Blinking
Your lock has been installed incorrectly and is not
Schlage Electronic Door Lock
secure. Repeat the installation process. Ensure the cam and
bolt positions are correct, as referenced in the installation
BE365: after pushing
Best Electronic Deadbolt Locks
thumbturn, the deadbolt
NoneNone
Turn Lock feature is disabled. See the Keypad Locks
Programming Guide for instructions to enable the Turn Lock
I forgot my Programming
NoneNone
Schlage Lock Manual
Check front of Keypad Locks Programming Guide or back of
If needed, restore lock to factory settings. See Restore
Outside thumbturn does not
thrown.
Lock is malfunctioning. See Emergency Lock Override on
I need to delete a User Code
NoneNone
Delete all User Codes. Then add all needed User Codes back
into the lock. See the Keypad Locks Programming Guide.
lock.
1 High,
Schlage Keypad Locks User Guide
Green then
Vacation Mode is enabled. See the Keypad Locks
does not light when
NoneNone
Too many incorrect User Codes have been entered. Wait 30
If keypad does not respond after 30 seconds, then replace
battery. For BE365, see page 3. For FE575 and FE595, page 5.
after a valid User Code is
High/Low,
Red then
Battery is low and should be replaced. For BE365, see page 3.
blinking red but no
None
Schlage Be365 Camelot Keyless Deadbolt Manual
Blinking
Schlage Digital Deadbolt Lock
Battery is dead and MUST be replaced. For BE365, see page 3.