MF Communications supply business with a wide range of new and remanufactured business phones, PBX System equipment and spares for the Siemens HiPath 4000. The Siemens HiPath 4000 is a modular, stackable, communications platform. It has scalable access points and software branches and it supports analogue, TDM or IP, allowing integration into. Here are the hiPath 3000 system and service manuals for download. We also have the Siemens Hicom Series Manuals here. Below find manuals for the HiPath 3000, 4000 and the 3000, 4000, 5000 Optipoint administration manual. Siemens hiPath 3000 and 4000 Service, Administration and User Guides Siemens hiPath. SIEMENS HiPath 4000 Real Time IP Phone System: HiPath 4000 is the Real Time IP Phone Systems for medium to very large enterprises. The innovative real-time IP system HiPath 4000 combines the advantages of IP-based communications and the service spectrum of telephone line communications systems – with greater resilience than could previously.
Step by Step
Administration
optiPoint 410 entry
34
Reset factory settings
Hipath 4000 Assistant
For standard values, see
Disconnect the red Western plug of the power supply
unit cable (Pos. 3
Æ page 12) or, if 'Power over LAN',
disconnect the LAN cable (Pos. 1
Æ page 12) from the
optiPoint 410 entry for a few seconds.
Web-based Management Tool
Reset factory settings via the Web-based Management
Tool
1. Open the Dialog „Factory Reset“
.
Menu: Administrator Actions > Factory Reset
2. Click on the button „Restart“
.
Function Codes
n
Lift handset.
flm
Press keys simultaneously.
o
Enter the reset password (124816).
r
Confirm the entry.
t
Replace the handset.
The resetting can lead to the failure of all the
functions of the optiPoint 410 entry. Ensure that
you have all the necessary information for start
up
Æ page 16.
Conducting calls – enhanced functions
49
Step by Step
Call forwarding
Using call forwarding
You can program two types of call forwarding:
• Fixed call forwarding and
• Variable call forwarding.
For fixed call forwarding, you programme a forwarding
destination that will remain valid until you change or
delete it. You can activate and deactivate this forward-
ing function.
For variable call forwarding, you can choose between
six different forwarding types:
• Variable forwarding (unconditional forwarding)
Siemens Hipath 4000 V6 Manual
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
Hipath 4000 Expert Access Commands
• Forwarding after timeout
• Forwarding on busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is deactivated, the forwarding destination is auto-
matically deleted.
If the handset is in idle status, you can receive the fol-
lowing display messages when call forwarding is active:
You can use codes to activate and deactivate call for-
warding (Æ page 56).
Forwarding type
Display message
Fixed call forwarding
Variable call forwarding
'Forwarding to
for example, 222 Klaus
Meier (own number)'
Forwarding for internal/
external
FWD-VAR-ALL-BOTH on
Forwarding on busy
FWD-VAR-BUSY-BOTH on
Forwarding after time-
out
FWD-VAR-RNA-BOTH on
Forwarding on busy/
after timeout
FWD-VAR-BZ/NA-BTH on
Fixed call forwarding
Hipath 3000 Manager E Download
FWD-FIXED on